?
快捷搜索:  as  test  1111  test aNd 8=8  test++aNd+8=8  as++aNd+8=8  as aNd 8=8

新蒲京澳門賭場網站:Liinux 系統無法進入圖形界面的解決過程

?

首先闡明,我是一個新手,所有有些地方可能很菜,有紕謬的地方還請大年夜蝦教育。

我安裝的是Red Hat Linux 9(另一個系統是Windows Xp),安裝時刻無法進入圖形界面,提示"留意:顯示越過范圍: H: xx KHz V: xxHz" ,然后黑屏,沒有法子,只好應用翰墨界面安裝,不過安裝照樣能成功的。采納grub登岸。之落后入Linux系統,在進入圖形界面的時刻,呈現同樣的提示,然后黑屏。

緣故原由是默認顯卡的驅動于顯卡不符,我的顯卡是GF FX5200 128M,找到驅動法度榜樣,但文件6MB多(NVIDIA-Linux-x86 -1.0-5336-pkg1.run),沒法用磁盤,由于我新蒲京澳門賭場網站有Combo,以是,驅動法度榜樣刻在光盤上。(安裝的時刻參照http: //www.nvidia.com/object/linux_display_ia32_1.0-5336.html)

詳細辦理歷程:1、在呈現選擇菜單時按e,然后選擇第二行(kernel *那一行)再按e,在結尾處輸入空格1.然后回車,按b向導。

2、呈現提示符后,vi /etc/inittab把id:5:initdefault的5改成3. (詳細改動措施:用偏向鍵找到要改動的地方,按鍵盤上的'Insert',向Word編輯一樣改動,之后按ESC,再按:W,然后Ctrl-z即可)

3、reboot 4、啟動后用root登岸5、把刻好的光盤放進光驅,mount /mnt/cdrom cd /mnt/cdrom 6、cp NVIDIA-Linux-x86-1.0-5336-pkg1.run \root cd /root 7、sh NVIDIA-Linux-x86-1.0-5336-pkg1.run 8、依照驅動法度榜樣的闡明改動ftp://download.nvidia.com/XFree86/Linux-x86/1.0-5336/README主要的一步如下:__________________________________________________________________________

(sec-03) EDITING YOUR XF86CONFIG FILE __________________________________________________________________新蒲京澳門賭場網站________

When XFree86 4.0 was released, it used a slightly different XF86Config file syntax than the 3.x series did, and so to allow both 3.x and 4.x versions of XFree86 to co-exist on the same system, it was decided that XFree86 4.x was to use the configuration file "/etc/X11/XF86Config-4" if it existed, and only if that file did not exist would the file "/etc/X11/XF86Config" be used (actually, that is an over-simplification of the search criteria; please see the XF86Config man page for a complete description of the search path)。 Please make sure you know what configuration file XFree86 is using. If you are in doubt, look for a line beginning with "(==) Using config file:" in your XFree86 log file("/var/log/XFree86.0.log")。 This README will use "XF86Config" to refer to your configuration file, whatever it is named.

If you do not have a working XF86Config file, there are several ways to start: there is a sample config file that comes with XFree86,and there is a sample config file included with the NVIDIA driver package (it gets installed in /usr/share/doc/NVIDIA_GLX-1.0/)。

You could also use a program like 'xf86config'; some distributions provide their own tool for generating an XF86Config file. For more on XF86Config file syntax, please refer to the man page.

If you already have an XF86Config file working with a diffe新蒲京澳門賭場網站rent driver(such as the 'nv' or 'vesa' driver), then all you need to do is find the relevant Device section and replace the line:

Driver "nv"(or 新蒲京澳門賭場網站Driver "vesa")

with

Driver "nvidia"

In the Module section, make sure you have:

Load "glx"

You should also remove the following li新蒲京澳門賭場網站nes:

Load "dri" Load "GLcore"

if they exist. There are also numerous options that can be added to the XF86Config file to fine-tune the NVIDIA XFree86 driver. Please see Appendix D for a complete list of these options.

Once you have configured your XF86Config file, you are ready to restart X and begin using the accelerated OpenGL libraries. After you restart X,you should be able to run any OpenGL application and it will automatically use the new NVIDIA libraries.(用vi 敕令,和vi /etc/inittab一樣用)

9、reboot 10、再在呈現選擇BOOT OS菜單時按e,然后選擇第二行(kernel *那一行)再按e,在結尾處輸入空格1.然后回車,按b向導。

11、呈現提示符后,vi /etc/inittab把id:5:initdefault的3改成5. 12、reboot這12部停止后,我就看到了我的圖形界面了有的地方可能寫得太具體,太弱智了,不過是為了方便第一次安裝和第一次打仗Linux的同伙,請大年夜蝦們不要笑我。

再次謝謝好好老師和及時贊助我的同伙。 :D

免責聲明:以上內容源自網絡,版權歸原作者所有,如有侵犯您的原創版權請告知,我們將盡快刪除相關內容。

您可能還會對下面的文章感興趣:

快三平台开户